Sort by:

None

Filter by:;

Product type:

All

Manufacturer:

All

Industry:

All

Request a free demo of dBPorous Subscribe

Featured products

Momentive's SilGrip NVH PSA Kit is a fully customizable noise and vibration damping product used primarily as a contact adhesive, as well as pressure sensitive tapes and transfer films. It can be applied in minutes if used as a contact adhesive, or immediately when used as a pressure sensitive tape or transfer film. The kit allows a wide damping range over low temperatures, room temperatures and high temperatures, depending on the chosen mix ratio.

MELAMINVLIES 350/15

A melamine fleece coated with an aluminum foil with reinforcing grid, thickness: 15 mm. This melamine etherified resin, has a surface density of 350g/m². Applications: sound absorption for automotive, construction, equipment manufacturing and electrical industry. Resistant to ageing, weather, UV, liquids in engine compartment.

DENSITY

STL

ABS

24

1

52

Price range icon
voc label icon
eFootprint label icon
Standards icon

IRIOVEL 140-20 H

Iriovel 140-20 H is a laminated hydrophobic and oleophobic polyester staple fiber. It is a thermal - insulating and sound absorbing material consisting of 100% thermobonded polyester. (Polyethylene terephthalate - Co-Polymer Polyethylene terephthalate). It was designed specifically for the insulation of high speed railway rolling stock fulfilling the requirement of being water- and oil-repellent.

DENSITY

STL

ABS

20

1

42

Price range icon
voc label icon
eFootprint label icon
Standards icon

SILGRIP NVH PSA - MT

"SilGrip NVH PSA - Mid Temp" is optimized for temperatures around 100 degC. It has been designed with the Momentive's SilGrip NVH PSA Kit, a fully customizable noise and vibration damping product used primarily as a contact adhesive, as well as pressure sensitive tapes and transfer films. It can be applied in minutes if used as a contact adhesive, or immediately when used as a pressure sensitive tape or transfer film. The kit allows a wide damping range over low temperatures, room temperatures and high temperatures, depending on the chosen mix ratio.

DENSITY

G

DLF

1382

0.001

137

Price range icon
voc label icon
eFootprint label icon
Standards icon

SILGRIP NVH PSA - HT

"SilGrip NVH PSA - High Temp" is optimized for temperatures around 150 degC. It has been designed with the Momentive's SilGrip NVH PSA Kit, a fully customizable noise and vibration damping product used primarily as a contact adhesive, as well as pressure sensitive tapes and transfer films. It can be applied in minutes if used as a contact adhesive, or immediately when used as a pressure sensitive tape or transfer film. The kit allows a wide damping range over low temperatures, room temperatures and high temperatures, depending on the chosen mix ratio.

DENSITY

G

DLF

1494

0

302

Price range icon
voc label icon
eFootprint label icon
Standards icon

FORM 77

Fully impregnated polyurethane foam with density of 80 kg/m³. Permanently elastic and made of fine-pored soft foam, this product is made of modified polyacrylate – free of softeners. Applications include soft elastic sealings for sound absorption and heat insulation, vibration dampening as well as protection against dust, humidity and draft. Resistant to ageing, weather and hydrolysis.

DENSITY

STL

ABS

89

1

5

Price range icon
voc label icon
eFootprint label icon
Standards icon

RUB-LAM

Rub-LAM is an excellent choice of material for sealing, isolation, friction as well as sound and vibration damping. Various types of metals and alloys can be used, with surface treatment if needed. The choice of elastomer (Damping Rubber) and thickness is based on the requirements of the application. Rub-LAM is an elastomer to metal sandwich material where the elastomer is vulcanized on one or two sides of the metal layer.

DENSITY

G

DLF

1100

0.003

18

Price range icon
voc label icon
eFootprint label icon
Standards icon

MCO-4600B-GR

Currently specified in numerous noise control systems at OEMs and noise control systems providers within the aircraft industry, this material provides excellent acoustic insulation as an overframe blanket. Acting as an acoustic absorber, the felt was engineered specifically to control noise in an aircraft. This Tex Tech material is a thicker version of Tex Tech’s MC8-4625BGR acoustic insulation materials, and can be used alone or combined with damping materials for added noise control. For interior aircraft use, the felt is typically treated with a protective coating of PTFE on the fiber surface to provide moisture and chemical repellency. Other attributes of this material include inherent fire retardance, high temperature and chemical resistance, as well as an extremely good resistance to the development of mold.

DENSITY

STL

ABS

48

4

60

Price range icon
voc label icon
eFootprint label icon
Standards icon

FORM 150 UL

Fully impregnated polyurethane foam with a density of 150 kg/m³. It is a high flame retardant foam. This permanently elastic fine-pored soft foam is impregnated with modified polyacrylate – free of softeners. Ideal for soft elastic sealing with high requirements in fire prevention for sound absorption and heat insulation, vibration dampening as well as protection against dust, humidity and draft. Specially developed for railway, automotive and electronic industry. Resistant to ageing, weather and hydrolysis.

DENSITY

STL

ABS

129

2

30

Price range icon
voc label icon
eFootprint label icon
Standards icon

FORM 1000

Fully impregnated polyurethane foam with a density of 1000 kg/m³. This permanently elastic fine-pored soft foam is impregnated with modified polyacrylate – free of softeners. Soft elastic sheets for sound absorption and vibration dampening as well as protection against dust, humidity and draft. Resistant to ageing, weather, hydrolysis and airtightness.

DENSITY

STL

ABS

888

1

3

Price range icon
voc label icon
eFootprint label icon
Standards icon

PREN SC4/15 BASIC

This partially impregnated polyurethane foam of 4 kg/m² is a permanently elastic fine-pored foam single coated mass-spring-system. The heavy-duty impregnation is acrylate-based. Ideal for sound-dampening, sound absorption and structure-borne noise attenuation. It is resistant to ageing, weather and hydrolysis.

DENSITY

STL

ABS

379

5

87

Price range icon
voc label icon
eFootprint label icon
Standards icon

VISCO-LAM

Visco-LAM is a sandwich material made of two layers of sheet metal laminated together with an intermediate layer of viscoelastic polymer (Low or High temperature VEM). Various types of metals and alloys can be used, in different thicknesses, with surface treatment if needed. The material performance can also be optimized by changing the dynamic properties of the polymer.

DENSITY

G

DLF

958

0.003

27

Price range icon
voc label icon
eFootprint label icon
Standards icon

FORM WF NANO

Fully impregnated polyurethane foam with a density of 60 kg/m³ and air permeability smaller than 10. This permanently elastic fine-pored soft foam is pre-compressed and slowly expanding multifunction-band. It is impregnated with modified polyacrylate – free of softeners. Ideal for soft elastic sealing for sound absorption and heat insulation, vibration dampening as well as protection against dust, humidity and draft. Resistant to ageing, weather and hydrolysis

DENSITY

STL

ABS

59

2

32

Price range icon
voc label icon
eFootprint label icon
Standards icon

MCO-4591B

Currently specified in numerous applications at OEMs and noise control systems providers throughout the aircraft industry, this thicker material provides general acoustic/thermal insulation as overframe blanketing, duct insulation, and carpet underlay. For interior aircraft use, the material is typically treated with a protective coating of PTFE on the fiber surface to provide moisture and chemical repellency. Other attributes of this material include inherent fire retardance, high temperature and chemical resistance, as well as an extremely good resistance to the development of mold.

DENSITY

STL

ABS

100

11

80

Price range icon
voc label icon
eFootprint label icon
Standards icon

To see full database...
Signup for free or Login